TM 9-1550-416-14&P
b. Throttle adjustments.
(3) Adjust throttle pushrod length to ensure that
(1) Observe that throttle servo arm is in fully
the carburetor is fully opened when the snap link is attached
forwardposition. (See fig. 2-8.) To adjust, remove servo arm
to the throttle servo arm. (See fig. 2-8.)
screw and servo arm. Reposition servo arm and replace servo
arm screw.
(2) Operate transmitter throttle control from full
up to down and observe that the throttle servo responds
correctly. Return throttle control to full up.
Figure 2-8. Receiver and servo/battery group connections.
Operate transmitter throttle control from full up to
(4) Operate transmitter throttle control several
(5)
full down and observe that throttle servo and carburetor barrel
times and observe throttle pushrod for proper operation.
move from fully opened to fully closed position. (See fig. 2-
2-10
