TM 9-1550-416-14&P
d. Elevator adjustments.
full down to full up and observe that elevator responds
(1) Observe that the elevator servo arm is aligned
parallel with trailing edge of wing assembly. (See fig. 2-8.) To
correctly. Return control to midrange position. (See fig. 2-12.)
adjust, remove servo arm screw and servo arm. Reposition
servo arm and replace servo arm screw.
loaded center position to full down and full up and back to
(2) Adjust pushrod length to allow full travel of
center and observe that elevator responds
the pushrod to respond to commands.
Figure 2-12. Elevator responses to control stick and pitch-trim control inputs.
2-13