TM 9-2320-209-10-1
FRAME 3
WARNING
Always wear leather gloves when handling winch cable
to prevent injury from brakes or loose wires. Do not
let cable slide through hands. Do not let personnel
stand near winch cable during winch operation. A
snapped cable can cause series injury. Do not go over
load limits shown on winch load chart on cab door to
prevent shearing of winch shear pin.
1.
Pull rear winch cable (1) out by hand.
2.
Rig cable (1) on sheaves (2) as needed. (Refer to para 4-15j.)
Raise derrick tube (3) if needed. (Refer to para 4- 15c.)
3.
GO TO FRAME 4
4-324
