TM 9-2320-211-10-1
Changing Tailgate Rigging - Rocker Type Operation.
.
To change from rocker type rigging to regular dump rigging:
1.
(a) Take tailgate chains (1) from holes and slots (2) on both right and
left sides.
(b) Pull retainer pins (3) from holes (4) .
(c) push tailgate (5) up into closed position and at same time swing wing
gates (6) toward front of truck.
(d) Place retainer pins (3) back in holes (4) locking hinge pins (7).
(e) Hook harness hooks (8) to wing gates (6).
(f) Place tailgate chains (1) under retainer hooks (9) andin holes and
slots (2). Leave just enough slack in chains (1) to let tailgate swing
free if lower tailgate latch ( 10) is unlocked.
TA
053951