TM 9-2320-211-10-1
d.
Rigging the Winch Cable and Wrecker.
NOTE
Rigging of the winch cable and truck will depend on
size and type of load, direction of pull, terrain, weather,
and how well the wrecker is anchored. Different ways to
do the rigging one given in the following instructions.
If you need more information refer to FM 20-22.
(1) For light loads.
I
FRAME 1
For light loads, hook winch cable (1) to object to be pulled.
1.
2,
For light load angle recovery:
(a) Hook winch cable (1) to load.
(b) Use field chocks (2) as shown, one toward rear and one toward side.
Steps for putting field chocks (2) in rear are same as for the front.
Refer to operation of front winch, para 4-7C.
TA
053966
