TM 9-2320-211-10-1
Pull BOOM control lever (1) toward operator a little to take load off
shipper braces (2) .
Unlock pin (3) and pull it from hole in T-pin (4).
Pull T-pin (4) from telescoping shipper braces ( 2).
Pull BOOM control lever (1) toward operator until boom (5) reaches
height needed.
Aline holes in telescoping shipper braces (2) and push T-pins (4)
through holes.
Push pin (3) through hole in end of T-pin (4) and lock pin (3).
Push BOOM control lever (1) away from operator a little to slightly lower
boom (5) to put boom load on shipper braces (2).
G0 TO FRAME 9
TA
053982
4-187
