TM 9-2320-211-10-1
Lifting and Swinging.
c.
1.
2.
Pull BOOM control lever ( 1) toward operator a little to take load off shipper
braces (2) .
Pull pins ( 3) from L-shaped pins (4) on right and left sides.
3.
Pull L-shaped pins (4) out of shipper brace brackets (5).
4.
Swing shipper braces (2) and place them on shipper brace retainer
5.
brackets (6) .
Push pins (7) through hole in retainer bracket (6).
6.
7.
Push L-shaped pins (4) in holes in shipper brace bracket (5).
8. Push pins (3) through holes in end of L-shaped pins (4).
GO TO FRAME 2
TA053984