TM 9-2320-211-10
(4) Replace retaining pins (3) in
tailgate upper hinge brackets (1).
(5) At completion of operations,
remove retaining pins (3) from upper hinge
brackets (1). Close tailgate (4) and replace
retaining pins (3) in upper hinge brackets
(1). Swing tailgate wings (2) forward against
dump body and secure with harness hooks
c. Rigging the Tailgate for Spreader Operation.
(1) Pull tailgate control lever (6)
forward and down as far as it will go and
unlock the tailgate.
(2) Remove tailgate chain (10) ends
from upper locking slots (7) and thread
chain through hooks (9) and under tailgate
(3) Insert chain ends into lower
locking slots (8) and adjust chain length to
limit tailgate opening, as required.
(4) At completion of operations, remove tailgate chain (10) ends from lower locking
slots (8) and pull chain through hooks (9). Insert chain ends in upper locking slots (7) and close
tailgate (4). Push tailgate control lever (6) up and back as far as it will go and lock tailgate in
closed position.
TA 067046