TM 9-2320-211-10
(Cont.)
TABLE 3-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CONTROLS AND INSTRUMENTS
19. Shimmy, or truck hard to steer.
Step 1. Check tire air pressure with tire gage.
Inflate or deflate tires to correct air pressure (see data plate).
Step 2. Other causes.
Notify organizational maintenance.
SERVICE BRAKES
20. Not enough air pressure for air-hydraulic brake cylinder.
Step 1. Check reservoir drain cocks.
If open, close drain cocks.
Step 2. Other causes.
Notify organizational maintenance.
21. Brakes fail on first application but function after pumping action.
Step 1. Check level of brake fluid.
If low, notify organizational maintenance.
Step 2. Other causes.
Notify organizational maintenance.
PARKING BRAKE
22. Brake does not hold.
Step 1. Check brake handle position.
If partially applied, pull up hard on parking brake handle.
Step 2. Check handle adjustment.
If out of adjustment, adjust.
TA
067159