TM 9-2320-269-10
STARTING AND STOPPING THE ENGINE FROM THE CONSOLE - CONTINUED
Stopping the Engine
NOTE
There is no need to use the engine stop control in the cab when shutting down the engine
at console. The start-stop switch is equipped with an engine kill kit attached, which stops
the engine when the switch is turned to STOP.
1.
To stop the engine, turn start-stop switch (1) to STOP position (2) at console.
2.
Proceed to the cab and turn key switch (3) to OFF position, if engine is not going to be used again for several
hours. This also conserves the battery.
3.
Disengage the PTO (4) only if the derrick, or any auxiliary attachment will not be used and only when the
engine is in idle.
TA 222600
2-111
