TM 9-2320-269-10
PLACING DERRICK INTO OPERATION - CONTINUED
NOTE
Make sure everyone is clear of the outriggers when you lower them. Lower one outrigger
at a time.
Make sure the M876 truck is level after you have positioned the outriggers. You may
have to readjust the outriggers after you have operated the derrick for a time.
Have assistant use throttle control to increase engine RPM, if necessary, during console
operation.
1.
Left Side of Truck
a.
Lift safety plate (1), and hold it out of your way.
b.
Push jack control (2) down and lower outrigger (3).
c.
Push jack control (4) down and lower outrigger (5).
2.
Right Side of Truck
a.
Lift safety plate (1) and hold it out of your way.
b.
Push jack control (6) down and lower outrigger (7).
c.
Push jack control (8) down and lower outrigger (9).
TA 222603
2-115