TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
f. Stow Rear Beacon Lights.
CAUTION
Do not let beacon drop when removing screws. Damage
to beacon can result.
NOTE
Right and left beacon lights are stowed in the same way.
(1) Remove two
nuts (1), lockwashers (2), washers (3), and screws (4) from
support bracket (5).
(2) Lower beacon support tube (6) until upper set of holes in beacon
support tube aline with holes in support bracket (5).
(3) Install two screws (4) through holes in support bracket (5) and beacon
support tube (6).
(4) Install two
washers (3), lockwashers (2), and nuts (1).
2-73