TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-63. M984E1 CRANE OPERATION (MANUAL CONTROLS) (CONT).
b. Set Up Outrigger
WARNING
Chock front wheels when using outriggers to prevent
vehicle from rolling.
Stand clear of outrigger beams while operating lever
or injury could result when beams come out.
NOTE
Always operate control levers with light, even
pressure.
Outrigger beams will come out slower with light
pressure on lever. Pushing lever to full travel will
cause faster movement.
(1)
Move O/R EXT lever (1) to IN position briefly and lift and turn right
outrigger lockpin (2) to unlock position.
(2)
Move O/R EXT lever (1) to OUT position until right outrigger
beam (3) is fully extended.
Change 3
