TM 9-2320-279-10-2
M984A1 General Operating Procedures (Cont)
(4)
Put transmission range selector (1 or 1.1) in N (neutral) position and
pull PARKING BRAKE control knob (2) out.
(4.1)
Apply front brakes (2.1).
(5)
Put PTO ENGAGE switch (3) in ON position. Indictor light (4) should
come on.
(6)
Set ON/OFF POWER switch (5) to ON position.
(7)
Set POWER switch (6) to ON position.
(8)
Set HIGH IDLE CONTROL switch (7) to CRANE position.
(9)
Push and release LATCH switch (8). Engine speed will increase to
approximately 1500 rpm.
Change 7
