TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(13) Clean all foreign material from socket (19) in outrigger (15) and
from rod end of outrigger jack cylinder (17).
NOTE
It may be necessary to retract outrigger slightly to fit
pad under jack cylinder
(14) Position outrigger pad (15) directly below outrigger jack cylinder (17).
WARNING
Keep hands and feet clear of outrigger jack cylinders to
avoid injury,.
NOTE
Adjust outrigger pad position as required so rod end will
lower into pad Soccket
(15) Move left outrigger jack (LH O/ R JACK) control lever (20) to DOWN
position and lower outrigger jack cylinder (17) until rod end is seated in
outrigger pad (1.5).
(16) Install retaining pins (18).