TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
TOW M984E1 (CONT).
2-74.
(10) Attach two springs (11) on tow cylinders (12) of recovery vehicle.
(11) Operate retrieval system of
recovery vehicle (para 2-72) so
center
assembly (13) is approximately 1 in. (25 mm) above and centered
directly over disabled vehicle's crosstube (6).
(12) Remove one 12-foot (3.5 m) chain (14) from stowage and route one end
of chain around crosstube (15), and around crosstube (6). Attach grab
hook (16) to chain.
(13) Repeat step (12) with other end of 12-foot (3.5 m) chain (14) for other
side of crosstube (6) and crosstube (15).
(14) Operate retrieval system (para 2-72) to
lift crosstube (15) until
chain (14) is tight.
2-190