TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-74. TOW M984E1 (CONT).
(16) Prepare recovery vehicle crane for operation (para 2-63).
CAUTION
Do not route chains over hydraulic hoses. Equipment
damage will occur.
(17) Remove 8-ft (2.5 m) utility chain (21) from stowage. Route utility chain
around lift cylinder (20) below hose guard mounting bracket (22) of
disabled vehicle.
(18) Operate crane controls to lower crane load hook (23) until
approximately 1 ft (30 cm) above 8-ft (2.5 m) utility chain (21).
(19) Attach 8-ft (2.5 m) utility chain (21) to crane load hook (23).
(20) Operate crane controls until slack is removed from 8-ft (2.5 m) utility
chain (21).
WARNING
When cylinder mounting pin is removed retrieval
system may suddenly move up or down. Keep hands
away from retrieval system or personal injury may
result.
(21) Remove cotter pin (24) and lift cylinder mounting pin (25) and stow on
disabled vehicle.
2-192
