TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(4) Pull LIFT CYLINDER control lever (6) to lower crosstube (7) to
approximately 3 ft (1 m) above ground.
(5) Position wrecker so that crosstube (7) is approximately 1 ft (30 cm)
from tow eyes of disabled vehicle and centered on disabled vehicle.
WARNING
When end caps are removed from crosstube, adapters
may slide off causing personal injury.
(6) Remove quick pins (8) and pins (9) from end caps (10).
(7) Remove end caps (10) from crosstube (7).
2-434
