TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-80. TOW M911 (CONT).
WARNING
Adapters and end caps may slide off when installing
and may cause personal injury.
(12) install two 5 -in. (127 mm) spacer tubes (18) on crosstuhe (7).
(13) Install two M911 rear tow adapters (17) on crosstube (7) with support
brace (19) to inside.
(14) Install two end caps (10) on crosstube (7).
(15) Install two pins (9) and quick pins (8).
NOTE
Adapter grab hook may be installed in either hole. For
M911 install grab hooks in hole closest to towing pin
holes.
(I6) Position adapter grab hooks (20) in hole neat to pin holes (21)
(17) Attach two springs (1) on tow cylinders (2).