TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
Remove two M977 front adapters (11) from crosstube (7) and Place on
(8)
equipment body floor (12).
(9)
Remove lock handle (13), lock plate (14), quick Pin (15), Pin (16), and
two M911 rear tow adapters (17).
(10)
Install two M977 front adapters (11) removed from crosstube, Pin (16),
quick pin (15), lock plate (14), and lock handle (13).
Install two 1-7/16-in. (37 mm) pins and two 5-in. (127 mm) spacer
(11)
tubes from stowage.
Change 3
