TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(18) Extend both tow cylinders (2) 2 in. (50 mm) and lower lift cylinder (19)
until M1008 adapters (15) are approximately 6 in. (150 mm) from
ground.
NOTE
If disabled vehicle has towing shackles installed,
remove shackles and stow in disabled vehicle.
(19) Position wrecker so adapters (15) contact rear bumper (20) of disabled
vehicle and are centered.
WARNING
Keep hands and fingers away from adapters when
operating retriever controls. Personal injury could
result.
CAUTION
Do not contact pintle hook with lift cylinders.
Equipment damage could result.
(20) Soldier A operates retrieval controls while Soldier A and Soldier B
guide adapters (15) down and under disabled vehicle's rear bumper (20)
until belt brace (21) alines with rear edge of bumper.
