TM
9-2320-279-10-2
Preparation for Transport and Operation (Cont)
E-13. EQUIPMENT BODY REMOVAL/INSTALLATION (CONT).
WARNING
Use wood blocks or other suitable means to support
equipment body during raising of legs. Equipment body
can fall and cause serious injury or death.
NOTE
Legs must be raised fully before installing pins with
wide side of plate pointing out.
(3) Soldier A places wood blocks on frame rail to support equipment body.
Soldier B lowers equipment body to make contact with wood blocks.
Soldier A removes four quick pins (2), pins (3), raises legs (4) and
installs pins and quick pins in legs. Soldier A removes wood blocks.
Soldier B lowers equipment body (5) onto vehicle.
CAUTION
Be sure that equipment body does not contact other
vehicle components during installation or damage to
other vehicle components may occur. Adjust lifting
device as needed to allow even lift.
NOTE
Use tiedown straps as needed to guide equipment body
during installation.
(4) Soldier A operates lifting device and positions and lowers equipment
body (5) on vehicle while Soldier B guides equipment body into place.
E-14
