TM
9-2320-279-10-2
Preparation for Transport and Operation (Cont)
(45) Remove lifting device from four corner lifting eyes (35) and stow. If
onboard crane was used, return crane to transport position
b. Installation.
WARNING
Keep out from under heavy equipment. Falling
equipment may cause serious injury or death.
CAUTION
Make sure lifting device does not interfere with winch
motor or hydraulic hoses. If lifting device catches on
motor or hoses it may damage equipment.
NOTE
Vehicle onboard crane may be used to install equip-
q
ment body. If other than onboard crane is used, skip
step (1) and start with step (2).
q 16-foot (5 m) safety chain and pallet sling from stow-
age should be used for lifting.
Installation of vehicle body is a two-soldier task.
q
(1) Prepare onboard crane for
operation with
remote control (para 2-58a).
(2) Attach lifting device to four corner lifting eyes (1).