TM 9-2320-279-10-2
Preparation for Transport and Operation (Cont)
(37) Turn shaft (48) counterclockwise until roller (53) does not contact
cable (54).
(38) Turn shaft (48) clockwise until roller (53) just contacts cable (54) then
turn stud clockwise eight more turns.
(39) Set HEAVY-DUTY WINCH switch (31) to ON.
(40) Move WINCH control lever (38) IN or OUT so clevis (39) is
approximately 2 in. (50 mm) from rollers (53).
(41) Set HEAVY-DUTY WINCH switch (31) to OFF.
(42) Pull FRONT BRAKE APPLICATION knob (26) to release front brakes.
E-21
