TM 9-2320-360-10
Table 3-1. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
WINDSHIELD WAS HER WILL NOT OPERATE.
Step 1.
Check if circuit breaker has been tripped.
Reset circuit breaker if it has been tripped.
CAUTION
Do not fill windshield washer reservoir with water when
temperatures are likely to be 32F (0 C) or less. If water freezes,
reservoir can crack or break.
Step 2.
Check washer reservoir fluid level.
Notify unit maintenance if fluid level is low.
Step 3.
Check washer reservoir, hoses , and hose connections for leaks and
damage.
Tighten loose washer hose connections. Notify unit maintenance if
washer reservoir or hoses are leaking or damaged.
Step 4.
Check washer spray openings for restrictions.
Clear washer spray openings using pin, wire, or similar item if restricted.
3-21