TM 9-2320-360-10
c. Flat Tire Removal
NOTE
If changing a tire on the front axle, start step (1). If changing a tire
on one of the rear axles, start at step (4.6).
WARNING
Never go under equipment when supposed only by jack. Keep clear
equipment when rising or lowering. Equipment may fall and use
serious injury or death to personnel.
Never go under HET Tractor with engine running. Vehicle may
move unexpectedly and cause serious injury or death to personnel
(1) Position jack plate (1) under spring saddle (2) so that both jacks can be placed on jack
plate.
NOTE
Jack no. 1 should be positioned approximately 2 in. (5.08 cm) in
front of spring saddle.
Ensure jack cylinder is completely
compressed.
(2) Position jack no. 1 (3) on jack plate (1), under spring (4) and in front of spring saddle (2).
Change 1 3-51