TM 9-2320-360-10
3-6. CHANGING TIRE ASSEMBLY (CONT)
CAUTION
Keep hoses clean and dry when removing from CTIS wheel valve.
Failure to comply may result in damage to CTIS wheel valve.
(5) Remove two hoses (11) from hub (12) and wheel valve (13).
WARNING
Do not remove nuts. Tire assembly could pop off causing injury or
death to personnel.
Never loosen or remove the 12 smaller nuts around t e outside of
h
the rim assembly. Rim could separate and cause injury or death to
personnel.
(6) Loosen 10 nuts (14) on flat tire assembly (10). Do not remove nuts.
(7) Raise jack no. 2 (6) until flat tire assembly (10) is off ground.
WARNING
Wheel assembly weighs 523 lbs (237 kg). Use caution when
handling wheel assembly to keep it from tipping over. Failure to
comply may result in serious injury or death to personnel.
(8) Remove 10 nuts (14) from studs (15) while assistant holds flat tire assembly (10).
(9) Deleted.
Change 1 3-52.3 (3-52.4 blank)
