TM 9-2320-366-10-2
CAUTION
Ensure cable is clear of crossbar and sandshoe when reeling in cable.
The cable socket may catch on crossbar or sandshoe. Failure to comply
may result in damage to equipment.
(16) Position MAIN WINCH RH switch (11) to IN and reel in cable (12) until approximately
12 in. (61 cm) of cable is hanging from the power fairlead (14).
(17) Repeat steps (12) and (13).
NOTE
After the first five wraps of cable have been payed out, positioning MAIN
WINCH RH SPEED switch to HI (high) is allowed.
(18) Position MAIN WINCH RH SPEED switch (10) to HI (high).
Change 1
