TM 9-2320-366-10-2
h. Remove Amber Warning Lights (M1089).
NOTE
Left and right side amber warning lights are removed the same
way. Right side shown.
(1) Remove clevis pin (1) and pin (2) from mast (3).
(2) Lift amber warning light (4) from mast (3).
(3) Disconnect mast electrical connector (5) from amber warning light electrical connector
(6).
(4) Install dust cap (7) on mast electrical connector (5).
(5) Using lanyard (8), lower mast electrical connector (5) into mast (3).
(6) Install pin (2) in mast (3).
(7) Install clevis pin (1) in pin (2).
(8) Place amber warning lights (4) in tool box.
