TM 9-2320-366-10-2
(8) Stow hydraulic jack (9), handle (10)
and jack adapter (10.1) in tool box.
CAUTION
Do not overtighten banjo bolt
when installing CTIS hose on
hollow wheel stud. Failure to
comply may result in damage to
equipment.
(9) Install CTIS hose (3) on hollow
wheel stud (4) with two washers
(11) and banjo bolt (12).
NOTE
Slotted hole in rim cover is
aligned with pressure valve
extension.
(10) Position rim cover (13) on wheel (14)
with four washers (15) and bolts (16)
(11) Notify Unit Maintenance to torque four
rim cover bolts to 71-95 lb. Ft. (96-128
Nm).
Change 2