TM 9-2320-366-10-2
Table 3-5. General Cleaning Instructions (Cont)
Cleaning Materials Used to Remove
Surface
Oil/Grease
Salt/Mud/
Surface
Dust/Debris
Rust/Corrosion
Radiator/
Not applicable.
Low pressure
Not applicable.
Auxiliary
water, air, soapy
Transmission
warm water, and
Oil Cooler
damp or dry rags.
Rubber
Damp or dry rags.
Damp or dry rags.
Not applicable.
Insulation
Tires
Soapy water and
High pressure
Not applicable.
bristle brush.
water and bristle
brush.
Cable
Cleaning compound
Wire brush.
Wire brush and
lubricating oil.*
and wire brush.
* After cleaning, apply light grade of lubricating oil to all unprotected surfaces to
prevent continued rust.
a. Cleaning Exterior.
Wash vehicle per table 3-5 General
Cleaning Instructions.
b. Cleaning Interior.
CAUTION
Do not allow water to contact
electrical controls, gages, or
indicators. Failure to comply
may result in damage to
equipment.
(1) Remove loose dirt and dust from
instrument panel (1) with damp wiping
rag.
3-113
