TM 9-2320-366-10-2
3-7. CLEANING VEHICLE (CONT)
(2) Clean seat cushions (2), seat belts (3),
and shoulder harnesses (4) with warm
soapy water.
(3) Wipe seat cushions (2), seat belts (3),
and shoulder harnesses (4) dry with
wiping rags.
NOTE
Both left and right side drain
plugs are removed/installed
the same way. Left side is
shown.
(4) Remove six drain plugs (5) from floor
(6).
CAUTION
Do not use water to clean
instrument panel area,
especially under instrument
panel. Failure to comply may
result in damage to
equipment.
(5) Using a low pressure hose, wash mud,
sand, or dirt from floor (6).
(6) Wipe excess water from floor (6) with
wiping rags.
(7) Install six drain plugs (5) in floor (6).
End of Task.
3-114
