TM 9-2330-203-14&P
Section IV. ORGANIZATIONAL TROUBLESHOOTING PROCEDURES
Page
Paragraph Title
Number
Explanation of Columns ....................................................................................................................
General ..............................................................................................................................................
Troubleshooting Symptom Index .......................................................................................................
Organizational Troubleshooting, Table 4-2 .......................................................................................
4-8. GENERAL.
a. This section provides information for identifying and correcting malfunctions which may develop when
operating or maintaining the dollies. You should perform the tests/inspections and corrective actions in the order listed.
b. This section cannot list all malfunctions that may occur or all tests or inspections and corrective actions. If a
malfunction is not listed, or is not corrected by listed corrective actions, notify your supervisor.
c The Troubleshooting Symptom Index in paragraph 4-10 lists common malfunctions that may occur and refers
you to the proper page in Table 4-2.
d. When troubleshooting a malfunction:
(1) Question the operator to obtain any information that might help determine the cause of the problem. Before
continuing, ensure that all applicable operator troubleshooting was performed.
(2) Locate the symptom in paragraph 4-10 that best describes the malfunction. If the appropriate symptom is not
listed, notify your supervisor.
(3) Turn to the appropriate page in Table 4-2 where the troubleshooting procedures for the malfunction in
question are described. Headings at the top of each page show how each troubleshooting procedure is organized:
MALFUNCTION, TEST OR INSPECTION (in step number order), and CORRECTIVE ACTION.
(4) Perform each step in the order listed until the malfunction is corrected. Do not perform any maintenance task
unless the troubleshooting procedure tells you to do so.
4-9. EXPLANATION OF COLUMNS.
The columns in Table 4-2 are defined as follows:
(1) MALFUNCTION. A visual or operational indication that something is wrong with the dolly.
(2) TEST OR INSPECTION. A procedure to isolate the problem in a component or system.
(3) CORRECTIVE ACTION. A procedure to correct the problem.
4-6
