TM 9-2330-203-14&P
4-47.
LANDING LEG BRACE REPLACEMENT.
This Task Covers:
a.
Removal
d. Assembly
b.
Disassembly
e. Installation
c.
Cleaning and Inspection
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
Two jackstands
One cotter pin
One pin
Two locknuts (M 197A1)
a.
REMOVAL
1.
Support front end of dolly frame with jackstands.
2.
Disconnect landing leg brace from landing leg (1)
3.
Raise landing leg (1) to traveling position and
remove frontward nut (2), lockwasher (3), and
screw (5) from retainer (4) on landing leg. Discard
lockwasher.
4.
With landing leg (1) still in traveling position,
remove center nut (2), lockwasher (3), and screw
(5) from retainer (4) on landing leg. Discard
lockwasher.
5.
Pull landing leg (1) forward and up as much as
possible. Remove rearmost nut (2), lockwasher
(3), and screw (5) from retainer (4) on landing leg.
Remove landing leg and retainer. Discard lock-
washer.
4-109