TM 9-2330-203-14&P
4-48.
LANDING LEG MAINTENANCE.
a.
REMOVAL
1.
If shoe (6) is damaged, heat tangs on shoe and bend them away from knuckle on inner leg (41). Remove shoe
from knuckle.
2.
On M197A1, remove two locknuts (12) and screws (10). Remove bracket (11) and spacer (13) from inner leg
(41). Discard locknuts.
3.
Turn handcrank (21) until inner leg (41) is fully extended.
4.
Remove nut (7), setscrew (8), and two screws (9).
5.
Remove inner leg (41) from screw (40). Remove collar (42) from inner leg.
6.
Remove nut (24), lockwasher (23), screw (22), and handcrank (21) from swivel (26). Discard lockwasher.
7.
Remove cotter pin (20) from screw (25). Discard cotter pin.
8.
Remove nut (19), two washers (18), screw (25), and swivel (26) from shaft (17).
9.
Remove four screws (29) and cover (30) from outer leg (34).
10.
Remove plug (35) from outer leg (34).
11.
Drive pin (28) out of shaft (17) and gear (27). Remove shaft and gear from outer leg (34). Discard pin.
12.
Remove nut (31), gear (32), key (39), and bearing (33) from screw (40).
TA510744
4-110