TM 9-2330-205-14&P
HUB AND BRAKEDRUM -CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL CONTINUED
Bearing cone (2)
Using hammer and drift, remove.
Hub (1)
10.
Discard seal (3).
and seal (3)
DISASSEMBLY
Using hammer and drift, remove.
Hub (1)
Six wheel studs (4)
11.
Hub (1)
Remove.
Drum (5)
12.
NOTE
Drum and drum adapter plate will remain assembled if drum is to be repaired at direct
support maintenance.
Drum adapter
Sixteen nuts (7)
Using 9/16-inch box-end wrench, remove.
13.
plate (6)
and sixteen
Iockwashers (8)
Sixteen serrated
Using hammer and drift, remove.
14.
bolts (9)
Drum adapter
Remove.
Drum (5)
15.
plate (6)
Bearing cups
Using hammer and drift, remove.
Hub (1)
16.
(10 and 11)
Discard cups (10 and 11).
ASSEMBLY
Drum adapter
Drum (5)
17.
a. Support adapter plate (6) on two
plate (6)
woodblocks.
b. Position drum (5) on drum adapter plate
(6) and aline mounting holes.
Using drift, install.
Sixteen serrated
18.
Ensure bolts are fully seated.
bolts (9)
Sixteen nuts (7)
Using 9/16-inch box-end wrench, install.
Drum adapter
19.
and sixteen
plate (6)
Iockwashers (8)
Hub (1)
a. Support hub (1) on two woodblocks.
20.
b. Position drum adapter plate (6) with
drum (5) on hub (1) and aline mounting
holes.