TM9-2330-207-14
b. 110-Volt Dome Light Switch (M129 Series).
Remove and install the 110-volt dome light switch
by following procedures shown in figure 4-10.
STEP 1.
REMOVE TWO SCREWS SECURING
SWITCH FACE PLATE. REMOVE
FACE PLATE.
REMOVE TWO SCREWS SECURING
STEP 2.
SWITCH TO WALL BOX.
PULL SWITCH FROM WALL BOX
STEP 3.
AND LOOSEN TWO CAPTIVE SCREWS
SECURING TWO WIRES TO SWITCH.
REMOVE WIRES, THEN REMOVE
SWITCH.
INSTALL TWO WIRES REMOVED IN
STEP 4.
STEP 3 ABOVE.
INSTALL SWITCH IN WALL BOX
STEP 5.
AND SECURE WITH TWO SCREWS
REMOVED IN STEP 2 ABOVE.
INSTALL SWITCH FACE PLATE
STEP 6.
REMOVED IN STEP 1 ABOVE.
4-27
