Figure 4-11. Typical taillight assembly replacement (24-volt taillight shown)

b. Remove and install the taillight assemblies

by following the procedures shown in figure

4-11.

STEP 1. DISCONNECT CABLE

CONNECTORS AFTER

REMOVING FROM CLIP.

STEP 2.

REMOVE TWO CAP SCREWS

AND LOCKWASHERS SECURING

TAILLIGHT ASSEMBLY TO

BRACKET.

INSTALL TAILLIGHT ASSY ON

STEP 3.

BRACKET WITH TWO CAP

REMOVED IN STEP 2 ABOVE.

STEP 4.

CONNECT CABLE CONNECTORS

DISCONNECTED IN STEP 1

ABOVE AND PLACE CONNEC-

TORS IN CLIP.

Figure 4-11. Typical taillight assembly replacement (24-volt taillight shown)