TM 9-2330-211-14&P
4-12.
COMPOSITE LIGHT ASSEMBLIES (Con't)
ACTION
ITEM
REMARKS
LOCATION
Door and lens
Separate.
2.
assembly (1) and
composite light
body (6)
Preformed packing (3)
Take out of groove (5) and inspect.
Composite light
3.
If damaged, discard preformed packing
body (6)
(3).
NOTE
Top lamp in composite light assembly is taillight, second
lamp is stop-turn lamp, third down is blackout taillight, and
bottom lamp is blackout stoplight.
Four lamps (4)
a. Push in, turn turn counterclockwise and
Composite light
4.
remove.
body (6)
b. Inspect for broken filament.
If filament is broken, discard lamp (4).
Four lamps (4)
Place in proper socket (7), push in, and turn turn
5.
clockwise.
Preformed
Place in groove (5).
Composite light
6.
body (6)
packing (3)
7.
Door and lens
Place in position on composite light body (6).
Composite light
body (6)
assembly (1)
Six screws (2)
Using screwdriver, screw in.
8.
4-22
