TM 9-2330-211-14&P
CLEARANCE LIGHT ASSEMBLIES (Con't)
4-13.
ACTION
REMARKS
ITEM
LOCATION
Lens (5)
Position in lens retainer (2).
5.
Push onto studs (4).
Two push-on nuts (6)
6.
NOTE
If replacing lamp (8), perform steps 7 through 9.
Light body (1)
a. Push in, turn turn counterclockwise and take
Lamp (8)
7.
out.
b. Inspect for broken filament and corrosion.
If filament is broken, discard lamp (8). If
contacts are corroded, clean with abrasive
cloth.
Inspect for corrosion.
Lamp socket (7)
Light body (1)
8.
If corroded, clean with abrasive cloth.
Place in lamp socket (7), push in, and turn turn
Lamp (8)
Light body (1)
9.
clockwise to detent.
Place on light body (1).
Lens retainer (2)
10.
Screw into light body (1) using flat-tip screwdriver.
Two screws (3)
11.
4-25
