TM 9-2330-211-14&P
4-23. SLACK ADJUSTER (Con't)
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION
5 . Camshaft (8)
Slack adjuster (9)
Slide slack adjuster (9) onto camshaft (8) so that
slack adjuster is straight up.
6. Clevic (2) and
Clevis pin (1)
a. Aline clevis (2) with slack adjuster (9).
slack adjuster (9)
b. Try to slide clevis pin (1) through clevis (2) and
slack adjuster (9).
c. If clevis pin (1) slides through clevis (2) and slack
adjuster (9), go to step 8.
d. If clevis pin (1) does not slide through clevis (2)
and slack adjuster (9), go to step 7.
Using
in. wrench, turn hex head (7) in or out so that
Hex head (7)
7.
Slack adjuster (9)
clevis pin (1) slides through clevis (2) and slack
adjuster (9).
Using pliers, insert and bend.
Cotter pin (3)
8.
Clevis pin (1)
Keywasher (6),
Screw in and tighten using in. socket and handle.
9.
Camshaft (8)
Iockwasher (4),
and bolt (5)
FOLLOW-ON MAINTENANCE:
Perform minor brake adjustment (para 4-20).
Remove chock blocks (para 2-5).
Check
brake
operation.
TASK ENDS HERE
4-61
