TM 9-2330-211-14&P
4-24.
CAMSHAFT (Con't)
ACTION
LOCATION
ITEM
REMARKS
10.
Bushing
Bushing (2)
Apply thin coat of grease to inside of bushing
bracket (1)
(2), not more than
in. (1.6 mm).
11.
Camshaft (12)
Spacer washer (9)
Slide onto cam end.
12.
Sleeve bearing (8)
Camshaft (12)
Push halfway through sleeve bearing (8).
Washer (6) and
13.
Camshaft (12) at
Slide washer (6) then retaining ring (5) onto
rear of spider (7)
retaining ring (5)
camshaft (12).
Retaining ring (4) and
14.
Camshaft (12)
Slide retaining ring (4) then washer (3) onto
washer (3)
camshaft (12).
at bushing
bracket (1)
Front of
15.
Push camshaft (12) into spider (7) as far as
Camshaft (12)
spider (7)
it will go.
16.
Rear of
One washer (6)
a. Hold washer (6) to rear of spider (7).
spider (7)
and retaining ring (5)
b. Using flat-tip screwdriver, slip retaining ring (5)
into retaining ring groove (11).
17.
a. Hold washer (3) to bushing bracket (1).
Camshaft (12)
One retaining ring (4)
at bushing
and washer (3)
b. Using flat-tip screwdriver, slip retaining ring (4)
into retaining ring groove (10).
bracket (1)
4-64
