TM 9-2330-211-14&P
LEFT LANDING GEAR LEG (Con't)
4-38.
ACTION
REMARKS
ITEM
LOCATION
a. Place board or padding underneath upper leg so
Locknut (37)
Screw (38)
23.
screw (38) will not be damaged if it falls out.
b. Using 1 in. socket and handle with in. drive,
unscrew and take out.
Using hammer and drift, drive out from hub of bevel
Screw (38)
Bevel gear (34)
24.
gear (34).
a. Take out block of wood.
Bevel gear (34)
Gearbox (18)
25.
b. Lift out bevel gear (34).
Take out from bottom of leg.
Screw (38)
26.
Upper leg (6)
and bearing (41)
Remove using magnet.
Key (42)
27.
Screw (38)
NOTE
Do not remove bearing (46) or bushings (39) unless they are
damaged.
Using bearing puller, take out.
Bearing (46)
28.
Gearbox (18)
Using brass drift and hammer, drive out.
Two bushings (39)
29.
in. wrench, unscrew and take out.
Using
Lubrication
30.
fitting (40)
Using
in. wrench, unscrew and take out.
Lubrication
31.
Upper leg (6)
fitting (45)
4-118
