TM 9-2330-211-14&P
LEFT LANDING GEAR LEG (Con't)
4-38.
ACTION
REMARKS
ITEM
LOCATION
ASSEMBLY
Hand pack with grease.
a.
Bearing (41)
Screw (38)
43.
b.
Seat on shoulder of screw (38).
a.
Hand pack with grease.
Bearing (46)
44.
Gearbox (18)
b.
Using hammer and drift, seat in bearing cup in
gearbox (18).
a.
Turn upper leg (6) upside down.
Screw (38)
45.
Upper leg (6)
b.
Install screw (38) through bottom of upper leg (6)
and seat bearing (41) against bottom of gearbox
(18).
c.
Lay upper leg (6) on its side.
Put in slot.
Key (42)
46.
Screw (38)
a. Line up slot in bevel gear (34) with key (42).
Bevel gear (34)
47.
b. Put bevel gear (34) on screw (38).
a. Jam bevel gear (34) with block of wood so it
Locknut (37)
48.
cannot turn.
b. Screw on locknut (37) and tighten using
in.
socket and handle with in. drive.
Tighten until there is no end play between
bevel gear (34) and screw (38).
c. Take out block of wood.
4-121
