TM 9-2330-211-14&P
LEFT LANDING GEAR LEG
4-38.
This Task Covers:
a.
Removal
d.
Inspection and Replacement
e.
b.
Disassembly
Assembly
f.
c.
Cleaning
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment (Con't):
Hex key, socket-head,
in.
Dry cleaning solvent (Item 13, Appendix E)
Hoist, 5 ton, with cables
Grease (Item 5, Appendix E)
Pliers, slip-joint, angle nose
Rags (Item 11, Appendix E)
Puller kit, mechanical
Punch, drive-pin,
in.
Personnel Required: Two
Retrieving tool, magnetic
References: TM 9-214
Screwdriver, flat-tip
in., in. drive
Tools/Test Equipment:
Socket, 1 in., in. drive
Container, 1 gallon capacity
in.
Wrench, open-end,
Drift, brass, in.
Wrench, open-end,
in.
Hammer, hand, ball-peen, 3 pound
Wrench, open-end,
in. (two required)
Handle, ratchet, in. drive
Wrench, open-end,
in.
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Corners (2)
a. Block rear wheels with chock blocks (para 2-5).
Semitrailer (1)
b. Using hoist, lift front of semitrailer until both
corners (2) are 38 in. (96.5 cm) off ground.
4-113
