TM 9-2330-211-14&P
4-41.
REFLECTORS (Con't)
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
3.
Frame (4)
Reflector (1 or 5)
a. Place in position.
b. Aline screw holes.
4.
Reflector (1 or 5)
Two screw (6),
Using flat-tip screwdriver and
in. wrench, screw
Iockwashers (2),
in and tighten.
and nuts (3)
TASK ENDS HERE
4-42.
DATA PLATES
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Hammer, ball-peen
Punch, center-solid
Screwdriver, Phillips
4-142
