TM 9-2330-211-14&P
RIGHT LANDING GEAR LEG (Con't)
4-39.
ACTION
LOCATION
ITEM
REMARKS
75.
Lower leg tube (3)
Nut (46)
Put on and line up holes.
76.
Nut (46)
Two pins (47)
Put in.
77.
Screw (40)
Lower leg tube (3)
Screw on until top of milled groove on lower leg tube
(3) can be seen through gib (22) opening.
78.
Upper leg (20)
Gib (22)
Put in.
79.
Gib (22)
Plug (23)
a. Screw in and tighten with screwdriver.
b. Back off plug (23) until slot lines up with holes for
cotter pin (24).
80.
Upper leg (20)
Cotter pin (24)
Put in; using pliers, bend both ends of cotter pin (24).
81.
Lower leg tube (3)
Shoe (2)
Install (para 4-37).
82.
Plug (19)
in. hex key.
Screw in and tighten using
83.
Semitrailer (1)
Corners (4)
a. Using hoist, lower semitrailer and remove
hoist.
Make sure both legs are extended to the
same length and are resting on the
ground.
b. Remove chock blocks (para 2-5).
4-138
