TM 9-2330-211-14&P
S e c t i o n IX. ACCESSORY ITEMS MAINTENANCE
Page
Page
Data Plates . . . . . . . . . . . . . . . . . . . . . . . .
Reflectors . . . . . . . . . . . . . . . . . . . . . . . . .
4-41.
REFLECTORS
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Screwdriver, flat-tip
in.
Wrench, open-end,
ACTION
LOCATION
ITEM
REMARKS
NOTE
There are two red reflectors at each rear corner of the semitrailer. There are two
amber reflectors at each front corner and one on the left and right side of the
gooseneck.
All reflectors are removed the same way.
REMOVAL
1.
Reflector (1 or 5)
Two screws (6),
Using flat-tip screwdriver and
in. wrench, unscrew
to frame (4)
lockwashers (2),
and remove.
and nuts (3)
2.
Reflector (1 or 5)
Pull off.
4-141
