TM 9-2330-211-14&P
5-14. DRUM (Con't)
ACTION
LOCATION
ITEM
REMARKS
CLEANING
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake
components unless area has been properly cleaned.
There may be asbestos dust on these components
which can be dangerous if you touch it or breathe it.
Wear an approved filter mask and gloves. Never use
compressed air or a dry brush to clean brake
components. Dust may be removed using an Industrial-
type vacuum cleaner. Clean dust or mud away from
brake components with water and a wet, soft brush or
cloth. Failure to follow this warning may result in
serious Illness or death to personnel.
Dry cleaning solvent P-D-680 Is toxic and flammable.
Always wear protective goggles and gloves, and use
only in a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO
NOT use near open flame or excessive heat. The
solvent's flash point is 100F-138F (38C-59C). If you
become dizzy while using cleaning solvent, Immediately
get fresh air and medical help. If solvent contacts eyes,
Immediately wash your eyes and get medical aid.
Drum (1)
a.
Clean in dry cleaning solvent.
b.
Allow to dry.
Do not use compressed air.
INSPECTION AND REPAIR
NOTE
For more Information on how to Inspect and repair
parts, refer to Chapter 5, Section II, General Maintenance
Instructions.
2.
Drum (1)
a.
Check stud holes for wear, cracks, and any
other damage.
TA506958
5-18
