TM 9-2330-211-14&P
5-16. DECK AND LOADING RAMP (Con't)
ACTION
LOCATION
ITEM
REMARKS
3.
Frame
Deck board (1)
a.
Using the old deck board (1) as a template, cut
crossmember (3)
the new deck board to proper length. Drill and
countersink bolt holes.
b.
Place in position.
4.
Deck board (1)
Bolt (2), bridge
a.
Screw in and tighten using 3/4 in. wrench.
and frame
clip (4),
Make sure lip of bridge clip (4) is under
crossmember (3)
lockwasher (5),
frame crossmember (3).
and nut (6)
b.
Using pliers, bend tab (7) down so nut (6)
cannot move.
c.
Perform steps a and b as many times as
necessary to install all hardware.
TASK ENDS HERE
Change 2 5-21